The 5 Steps in Vinyl Siding Installation

Thursday, November 25, 2010

If you are interested in what a vinyl sliding is and how it is fixed in place, read this article. Vinyl siding is plastic exterior cladding for a house, used for decoration and weatherproofing, as an alternative to traditional wood siding or other materials such as aluminum or fiber cement siding. It is an engineered product, manufactured primarily from polyvinyl chloride. It is popular because it is maintenance-free and easy for almost anyone to install. Installation is relatively simple. The challenge is in planning your layout well and placing the correct trim for each area of your building's exterior. Both siding and any tools needed are easily obtained at your local home improvement center. In installing a vinyl siding you'll need Hammer, Galvanized roofing nails, Vinyl siding, Tin snips, Snap lock punch, Vertical furring strips, and a Utility knife. There are five easy steps to put on Vinyl Sidings in place, learn them for your own comfort. They are as follows: Step 1 - Begin by attaching the starter strip that came with the package. The bottom of the first vinyl section will lock into this strip. Step 2 - Proceed up the wall; connect each length of siding by locking it into the piece below it, then nailing it loosely into place, driving the nail into the wood studs or the sheathing. Step 3 - Where the vinyl siding connects to a door, window, or wall will need the appropriate trim piece that are meant to hold the vinyl in place, cover cuts and imperfections, and provide an area where the siding can swell and shrink according to the environment. Place these trim sections where they are needed. Step 4 - At the outside corners, place the outer corner posts using the channel molded into the sides as your guide. Overlap two sections of J-channel trim at the top corner of windows and doors to send moisture down and to the sides of windows so that water won't see behind the siding or the trim. Step 5 - When vinyl siding lies against a horizontal surface, such as a window, place a piece of under sill trim. Cut the top edge of the siding to fit, but the under sill trim has been designed to grasp onto this cut edge and hold it firmly Now you already have installed a vinyl siding to your home. But if you find this job tiresome get help from us at timeforremodeling.com

Visit http://www.yehhee.com/articles

0 comments:

Post a Comment

  ©Blog by:

Jameselle Blog